HOME

TRAILERS & ACCESSORIES

PARTS PLUS
FUEL TRAILERS

NEW & USED EQUIPMENT

LIVESTOCK HANDLING EQUIPMENT

FENCING

FARM SUPPLIES & HARDWARE

BOOTS & CLOTHING

TOYS - COLLECTABLES

GIFTS
SHOWERS / REGISTRY

CONTACT US

BACK

Shaver Post Driver

 

POWER

With models delivering up to 100,000 pounds of impact, Shaver standard post drivers can drive everything from steel posts to wood posts to even railroad ties into the ground.

SIMPLICITY

Shaver standard post drivers make driving posts simple. Just attach the driver and go. No digging, no pointing, no tamping and no setting. 

SPEED

Shaver post drivers make quick work out of fence building chores, allowing you to drive a four- or five-inch post in as little as 10 to 15 seconds. 

RELIABILITY

You can be sure that your post driver will pay for your investment in it long before it's done working for you. 

SAFETY

Shaver Manufacturing is committed to safety. That's why every Shaver post driver we build is engineered with your safety in mind:

  • Offset controls let the operator stand safely to the side of the driver.
  • Rubber guard shields the operator from impact and any flying debris. 
  • Safety arm securely positions posts in the driving ram.
  • Standard stabilizer package provides greater stability during operation.
 

   
   

 

Specifications

HD-8 HD-10 HD-12
Impact at Full Stroke 30,000 lbs. 71,500 lbs. 100,000 lbs.
Effective Weight of Spring-Powered Hammer 360 lbs. 725 lbs. 1,100 lbs.
Operating Distance Above Ground 53"-126" 53"-128" 53"-128"
Max. Post Width 7 1/8" 8 3/4" 10 7/8"
Max. Post Length 10' 10' 10'
No. of Block Studs 4 4 6
No. of Nyrim Blocks 4 4 6
Tilt Front-back/side-side Front-back/side-side Front-back/side-side
With Manual Base Plate 15 degrees/15 degrees 15 degrees/15 degrees N/A
With Hydraulic Base Plate 15 degrees/15 degrees 15 degrees/15 degrees 20 degrees/25 degrees
Four-Inch Pilot Auger Attachment N/A Optional Optional
Category I, II or III Assembly Cat. I & II Cat. II & III Cat. II & III
Mounting Front or rear or skid loader Front or rear or skid loader Rear or skid loader
Hydraulic Requirements 3-4 GPM/1,500 PSI 12 GPM/1,500 PSI 15 GPM/2,000 PSI
Approx. Shipping Weight with Hydraulic Base Plate 486 lbs. 714 lbs. 957 lbs.
With Manual Base Plate 438 lbs. 694 lbs. N/A
The Positioners SB-02 SB-12 SB-22
Collapsed Width 66" 66" 92"
Extended Width 90" 90" 116"
Height 37 1/2"-55 1/2" 37 1/2" 37 1/2"
Weight 705 lbs. 680 lbs. 861 lbs.
Swivel 0-155 degrees 0-155 degrees 0-155 degrees

The specifications for Standard Post Drivers are subject to change without notice.

 

 

 

 

 

 

 

 

This site is © Copyright Box, Inc. 2008-2009, All Rights Reserved